University Specific SGPA Rules for Top Indian Universities 2026
India • 2026

University Specific SGPA Rules for Top Indian Universities 2026

No single formula converts SGPA to percentage across India — each university has its own rule. Compare the official conversions for IITs, NITs, DU, Anna, VTU, Mumbai, GTU, SPPU and more with the multi-university tool below.

10+ universities Official vs convention Compare tool
university-sgpa-rules.compare
–
awaiting input
Pick your university’s rule
2026

Ask ten Indian students how to convert SGPA to percentage and you will hear five different formulas — because university-specific SGPA rules are the reality of Indian higher education. There is no national standard: the UGC’s CBCS framework defines grading but leaves percentage equivalence to each university. Some notify a crisp formula (IIT Delhi ×10, VTU (CGPA−0.75)×10), some publish band tables (UoR Jaipur, SPPU Pune), many notify nothing at all, and one (Utkal) says no conversion is needed. This guide maps the major university-specific SGPA rules across IITs, NITs, central and state universities, shows how the same SGPA yields wildly different percentages under different rules, and tells you how to find — and cite — your own university’s rule.

Why No Single Formula Exists

India’s higher education has no national grade-conversion standard. The UGC’s CBCS framework defines how grades are awarded (the 10-point scale, SGPA/CGPA computation) but deliberately leaves the percentage equivalence to each university. The result is a patchwork:

  • Some universities notify an exact formula (IIT Delhi ×10, VTU (CGPA−0.75)×10).
  • Some publish band tables or equations (UoR, SPPU).
  • Many notify nothing at all — students rely on convention and third-party claims.
  • A few (Utkal University, 2021) say no conversion is needed: use marks directly.

This page maps the major rules so you use your own university’s — never a borrowed one. Try the comparison tool above to see how much the rule changes the answer for the same SGPA.

The Big Families of Conversion Rules

Nearly every Indian university rule falls into one of five families:

FamilyFormulaExample universities
Straight multiplierSGPA × 10IIT Delhi, DTU, Anna University
CBSE-style multiplierCGPA × 9.5CBSE (schools); DU convention
Offset multiplier(CGPA − 0.75) × 10VTU, AKTU
Half-offset multiplier(SGPA − 0.5) × 10GTU
Scale-and-shift(CGPA × 7.1) + 11Mumbai University
Band / equationPiecewise tablesUoR Jaipur, SPPU Pune
  • The same 8.0 SGPA becomes 80.0% (×10), 76.0% (×9.5), 72.5% (VTU), 75.0% (GTU), or 67.8% (Mumbai) — the rule matters enormously.
  • Never apply a rule from a different family to your university.

IITs: Each Institute Its Own Rule

The IITs are autonomous — each notifies its own conversion, and they differ:

IITNotified ruleDo NOT borrow
IIT DelhiSGPA × 10 (2017 certificate)Madras ×9.5
IIT MadrasCGPA × 9.5 (historical)Delhi ×10
IIT BombayCPI × 10 (own ordinances)Either above
IIT KharagpurCGPA × 10 (own rules)—
  • “But we’re both IITs” is not a valid basis — check your own institute’s notification.
  • Newer IITs generally follow ×10; verify against your academic rulebook.

NITs and Central Universities

  • Most NITs use CGPA × 10 as the notified conversion.
  • Delhi University: the ×9.5 figure is widely cited as convention (CBSE lineage); DU itself has not published a single crisp university-wide formula — treat ×9.5 as convention, not notification.
  • JNU: ×9.5 is the UGC-CBCS-default convention — but JNU historically used a 9-point scale, so check your transcript’s legend before converting anything.
  • BHU, AMU, Allahabad: generally ×10 convention; confirm per faculty.

State Technical Universities

UniversityRuleStatus
VTU (Karnataka)(CGPA − 0.75) × 10Official
AKTU (UP)(CGPA − 0.75) × 10Official
GTU (Gujarat)(SGPA − 0.5) × 10Official
RGPV (MP)CGPA × 10Convention
MAKAUT (WB)(CGPA − 0.75) × 10Official
  • The −0.75 offset is official at VTU/AKTU/MAKAUT — but it belongs to them alone.
  • Applying VTU’s offset at a ×10 university understates your percentage by 7.5 points.

State General Universities

UniversityRuleStatus
Anna UniversityCGPA × 10Official
Mumbai University(CGPA × 7.1) + 11Official
SPPU (Pune)Circular 332/2020 band equationsOfficial
UoR (Jaipur)Marksheet band table (6-pt scale)Official
Utkal UniversityNo conversion — use marks directlyOfficial (2021)
Gujarat UniversityGPA × 9.5Convention (third-party)

The Band-Table and Equation Outliers

Two major universities reject single multipliers entirely:

  • University of Rajasthan (Jaipur): a 6-point scale with a piecewise marksheet band table (Ordinances O.199F1–O.199F5). Each CGPA band has its own percentage equation. CGPA × 10 is flatly wrong here.
  • SPPU (Pune): Circular 332/2020 gives grade-band equations (8.88 → 80%, 8.18 → 70%, …) with interpolation inside bands. The popular ×8.9 is only a rough shortcut.

If your university uses bands or equations, a calculator that only multiplies is the wrong tool — use the band lookup.

Official Rules vs Mere Convention

StatusMeaningExample
OfficialNotified by the university (ordinance, circular, certificate)IIT Delhi ×10 (2017 certificate)
ConventionWidely used, no notification foundGujarat University ×9.5
  • Official rules survive verification; conventions may not.
  • For critical paperwork (government jobs, visas), get the examination section to confirm in writing if your rule is only a convention.
  • Never present a convention as “official” on a form — write “as per widely cited conversion” instead.

How to Find Your University’s Rule

  1. Check your grade card / transcript legend — many print the conversion on the back.
  2. Search your university website for “conversion”, “ordinance”, “percentage equivalence”.
  3. Ask the examination/academic section — the only authoritative source.
  4. Check the academic ordinances / regulations PDF for your admission year.
  5. Do NOT trust converter websites as primary sources — they copy each other, errors included.

What to Write on Official Forms

  • Report the converted figure and its basis: “78.50% (SGPA 7.85 × 10, IIT Delhi 2017 certificate)”.
  • If the rule is a convention: “76.00% (GPA 8.0 × 9.5, widely cited conversion; university confirmation awaited)”.
  • Attach the grade card; offer the notification copy if you have it.
  • Never leave the basis blank on government/PSU forms — verifiers check.

Common Cross-University Mistakes

  • Borrowing IIT Madras ×9.5 at IIT Delhi (or vice versa).
  • Using VTU’s −0.75 offset everywhere — it belongs to VTU/AKTU/MAKAUT only.
  • Applying ×10 at UoR Jaipur — UoR is a 6-point band-table system.
  • Using CBSE ×9.5 for universities — CBSE’s rule is for Class 10 school results.
  • Ignoring the 9-point scale — JNU’s historical 9-point transcripts need their own legend, not ×10.
  • Converting when Utkal says don’t — Utkal’s 2021 position: use marks directly.

FAQs

Is there one national SGPA to percentage formula in India?

No. India has no national conversion standard. Each university notifies (or doesn’t notify) its own rule — ×10, ×9.5, (CGPA−0.75)×10, band tables, and piecewise equations all coexist.

Which universities use SGPA × 10?

IIT Delhi (2017 certificate), DTU (Ordinance 9.5), Anna University, and many others use a straight ×10. But never assume — check your own university’s notification.

What is the CBSE ×9.5 rule?

CBSE’s historical Class 10 conversion: Percentage = CGPA × 9.5. It applies to CBSE school results only — it is not a university rule, though Delhi University is often associated with it.

Why do VTU and AKTU subtract 0.75?

Their notified rules are Percentage = (CGPA − 0.75) × 10. The offset accounts for their grading calibration — it is official for those universities, but must never be borrowed by others.

What should I do if my university never notified a formula?

Use the most widely cited convention for your university, state it explicitly on forms, and get the examination section to confirm in writing for critical paperwork.

Can I use another university’s formula?

No. Conversions are institute-specific. Using IIT Madras’s ×9.5 at IIT Delhi, or VTU’s −0.75 offset elsewhere, produces a wrong percentage that won’t survive verification.

Conclusion

India has no single SGPA-to-percentage formula, and pretending otherwise is how students lose marks on paper. Each university — each IIT, each state technical university, each general university — notifies (or fails to notify) its own rule, from IIT Delhi’s clean ×10 to Mumbai’s (×7.1)+11 to UoR’s band tables. The comparison tool above shows how violently the answer swings with the rule for an identical SGPA. Your job is simple: find your own university’s notified rule, cite it on every form, and never borrow a neighbour’s. When no notification exists, say so honestly and get the examination section’s confirmation in writing for anything that matters.

Check your SGPA rules
percentage

Enter your SGPA above to see the corresponding
percentage instantly.

Try the calculator
Official Source
Grading guidelines verified from: UGC Official Website