IISc • Bengaluru • 2026

IISc CGPA to Percentage Calculator 2026: x10 Formula, Table and Examples

Use the iisc cgpa to percentage calculator below to convert your IISc CGPA with the official Senate x10 notional rule from the 2021 notification. Enter your CGPA for your percentage and conventional band, or enter a percentage to work backwards to the CGPA you need. The grading scale, worked examples and conversion table are all on this page.

CGPA x 10 rule Instant result No sign-up
sgpatopercent.com
–
awaiting input
Formula: CGPA x 10

Official rule: the 2021 IISc notification states CGPA x 10 on the 10-point scale, notional only. Grade points themselves are not convertible into percentage at IISc.

Percentage = CGPA x 10 2026

Indian Institute of Science (IISc), Bengaluru, in Bengaluru, reports student performance on a 10-point grade point scale, yet recruiters, admission portals, scholarship forms and government notifications almost always ask for a percentage. That mismatch is the whole reason this page exists. IISc itself uses GPA for the semester average and CGPA for the cumulative average, so this page converts the cumulative figure, pooled across all courses in the programme, with the official 10-point notional rule.

Use the calculator at the top of the page for an instant conversion in either direction, then read the sections below for the official rule behind the calculator, the grading scale that produces the cgpa, worked examples across the full range, the conversion table, the conventional division bands, the mistakes students most often make, and how to use the converted figure on real forms. For the all-India overview, read the main CGPA to Percentage guide, and for the difference between a single semester figure and the cumulative figure, read the SGPA Vs CGPA guide.

One rule governs every number on this page: convert with your own institute rule, never with a generic multiplier. A single wrong multiplier moves a percentage by several points, and a verification against the institute rule will expose it. The sections below therefore name the source of the rule, its status, and every competing rule that students commonly confuse with it, so that the converted figure you quote is one you can defend.

How CGPA to Percentage Conversion Works

IISc runs on a credit system with continuous evaluation. Every course carries credits, every course earns a letter grade, and every letter grade carries a grade point on a 10-point scale. The cgpa pools those grade points with credits as weights, and converting that average to a percentage does not involve re-weighting anything, re-reading the grade card, or applying a lookup table: the institute conversion rule is a single multiplication.

Percentage = CGPA x 10

A value of 8.0 becomes 80.00 percent. A value of 7.5 becomes 75.00 percent. A value of 6.0 becomes 60.00 percent. The simplicity is the point, and it is also the trap: because so many Indian universities and boards use a different multiplier, students routinely apply the wrong one. CBSE used 9.5 for its school CGPA, some universities subtract an offset before multiplying, and forum posts about this institute itself have claimed adjustments that are not in the institute rule. None of those rules applies here. This page uses only the rule stated in the official basis section, and it flags every place where a different rule is sometimes quoted so that you do not mix them up.

Three distinctions keep the conversion clean. First, a semester figure covers one semester only, while a cumulative figure covers all semesters completed so far, so converting a semester figure gives the percentage equivalent of that one semester, not of the degree. Second, the figure on the grade card is the notified figure: use the figure printed on the card, not a figure recomputed from memory or from rounded semester averages. Third, percentage and marks are not the same thing in every context: a percentage converted from a grade point average is an equivalent percentage for eligibility and comparison, and a form that asks for marks obtained out of total marks wants a different calculation, covered on the Marks to Percentage page.

CGPA to Percentage Formula

The CGPA to percentage formula used on this page is:

Percentage = CGPA x 10

Work it in one step. Take the value exactly as notified, multiply by 10, and keep two decimals in the result. The decimal point simply moves one place to the right, which is why the conversion feels trivial once you know the multiplier, and why getting the multiplier wrong is so easy to miss: every wrong multiplier still produces a plausible-looking percentage.

The reverse formula is just as simple, and it is the formula to use when a notification states a percentage cutoff and you need to know the value it corresponds to:

CGPA = Percentage / 10

A 75 percent cutoff means a value of 7.50. A 60 percent cutoff means a value of 6.00. An 85 percent cutoff means a value of 8.50. Because the rule is linear with no offset, every 0.1 of the average is exactly 1 percentage point, and every 1 percentage point is exactly 0.1 of the average. That one-to-one relationship makes planning straightforward: if you are at 7.30 and the bar is 75 percent, you need 0.20 more, which is 2 percentage points, and you can plan the remaining semesters around that gap instead of guessing.

  • Forward conversion: 8.00 x 10 = 80.00 percent.
  • Reverse conversion: 80.00 percent / 10 = 8.00.
  • One decimal place moves: 7.85 becomes 78.50 percent, not 78.5 percent rounded carelessly in a form that wants two decimals.
  • Rounding: convert at full precision and round only the final percentage. Rounding the average first, for example from 8.47 to 8.5, adds 0.30 of a percentage point that is not in the notified figure.
  • Ceiling: the maximum value of 10.00 converts to 100.00 percent, unlike offset rules at other universities where the ceiling sits below 100 percent.
  • Notional: where the institute calls the formula notional, it means the notified equivalent for external use, not a claim that the average was itself computed from percentage marks.
Example walk-through: your grade card shows 8.00. Multiply: 8.00 x 10 = 80.00 percent. That is the figure to quote on a form that asks for percentage, with the average itself quoted alongside it wherever the form has a separate field for it.

The Official Basis and the Rules It Replaces

IISc publishes its conversion rule in a signed notification, reference IISc/Acad/CGPA-Conversion/2021, dated 14 October 2021, titled Formula for Notional Conversion of CGPA to Percentage. The notification records that the IISc Senate, in its meeting held on 11 November 2019, approved the formula, and that the Governing Council noted it on 21 December 2019. That chain of approval, Senate plus Governing Council plus a signed notification, is the strongest form of official backing a conversion rule can have, and this page follows it exactly.

The notification states the rule in two parts, and both parts matter. For the 10-point scale, multiply CGPA by 10 to get percentage. For the 8-point scale, multiply CGPA by 12.5 to get percentage. The 10-point system applies to students joining from the academic year starting in August 2016, while students who joined before August 2016 continue on the 8-point scale. The calculator on this page is built for the current 10-point scale only, because a single 0 to 10 input cannot serve both scales, and a pre-2016 student who entered an 8-point value into a 10-point calculator would get a wrong percentage.

The notification carries two warnings that this page repeats in full. First, grade points awarded are not convertible into percentage at IISc: the conversion is notional, meaning it is a notified equivalent for external use, not a claim that the grade points were computed from percentage marks. Second, no individual certificate or letter would be issued on this issue after the notification, so students should quote the notification itself, with its reference number and date, rather than expecting a personal conversion letter from the institute.

Verification status for this page: Verified official. Rule used: CGPA x 10 on the 10-point scale, notional; CGPA x 12.5 on the old 8-point scale for students who joined before August 2016. Verify the rule through the IISc official website and through the source document linked here: official source document. Where the source document and a converter website disagree, the source document wins. The University Grants Commission framework does not prescribe one national multiplier, which is exactly why each institute rule has to be checked on its own.

Grading System

The average is built from letter grades, and the letter grades are where the 10-point scale lives. Each course earns a letter grade, each letter grade carries a grade point, and the credit-weighted average of those points is the figure converted on this page.

Letter gradeDescriptionGrade point
A+Outstanding10
AExcellent9
B+Very Good8
BGood7
CAverage6
DPass5
FFail0

The grade table above is cited from secondary summaries of the IISc 10-point scale for students joining from August 2016, where A+ carries 10 points down to F at 0 points. It is labelled as cited secondary because the conversion notification itself states the multipliers and the scale change date but does not print the full grade table, so students should confirm the grade legend on their own transcript for their programme before relying on any single grade point.

Several features of a 10-point letter-grade system deserve attention because they change how a semester plays out. First, the scale steps down in whole or half points depending on the institute, so one grade step in one course is worth a fixed number of grade points, and the credit weight of the course decides how much that step moves the average. Second, audit and non-credit courses are normally excluded from the average, so such a course neither helps nor hurts it. Third, failed courses contribute zero points where they are counted, and repeat rules decide whether a later pass replaces the fail in the average. Do not borrow a grade point from another institute scale: grade letters look alike across institutes while their points differ, and only this institute table governs this institute grade card.

How CGPA Is Calculated

CGPA is the credit-weighted average of grade points across all courses counted toward the degree, pooled across every semester completed so far. The formula is the same at every institute on a 10-point scale, and it is worth writing out because most recomputation errors come from ignoring the weights:

CGPA = sum of (credits x grade point) / sum of credits

Credits are the weights. A 4-credit course moves the CGPA twice as much as a 2-credit course with the same grade, and a heavy laboratory or project course can move the average more than a light theory elective. The worked example below pools two semesters the way a cumulative average actually works, and it shows why averaging semester figures without their credits gives the wrong answer.

SemesterCreditsSemester averageCredit points
Semester 1208.20164
Semester 2227.60167
Cumulative427.88331

Cumulative average = 331 / 42 = 7.88. Converted: 7.88 x 10 = 78.80 percent. Notice what a plain average of the two semester figures would have given instead: (8.20 + 7.60) / 2 = 7.90, which converts to 79.00 percent. The gap is small here, only 0.20 of a percentage point, but with unequal semester credits and a wider spread of grades it grows quickly, and it is the single most common error in student recomputations. The guide on CGPA Calculation Mistakes walks through the usual errors in full.

A student who recomputes a cgpa from a grade card and finds a small mismatch should check the credits column first, then check whether a repeated course, an audit course or an excluded grade is in the list, and only then query the department or the academic office. Small mismatches are almost always a weighting or exclusion error in the recomputation, not an error in the notified figure. Always quote the notified cumulative figure on a form when it is available, not a figure recomputed from memory.

Step-by-Step: Converting Your CGPA

From grade card to a finished percentage in four steps:

  • Step 1: Take the exact figure from your official grade card. Use the notified figure, for the correct semester or for the cumulative record as the form asks. Do not use a semester figure in place of the cumulative figure, and do not use a figure you calculated yourself from rounded semester figures when the card figure is available.
  • Step 2: Multiply by 10. Move the decimal point one place to the right. A value of 8.00 becomes 80.00 percent. There is no addition, no subtraction, no offset and no second step.
  • Step 3: Keep two decimals. Write 80.00 percent, not 80 percent, where the form expects a precise figure, and match the receiving form decimal places. Round only the final percentage, never the average before converting.
  • Step 4: Quote both figures where the form allows it. Many portals have separate fields for the average and the percentage. Filling both, 8.00 and 80.00 percent, lets a verifier check the conversion at a glance and removes any doubt about which multiplier was used.

Reverse conversion, from a stated percentage cutoff to the value you need, runs the same steps backwards:

  • Step 1: Take the cutoff percentage exactly as notified. A 60 percent cutoff, a 65 percent cutoff and a 70 percent cutoff are different bars, and rounding a cutoff down in your head is how students miss eligibility by a fraction.
  • Step 2: Divide by 10. 60 percent becomes 6.00, 65 percent becomes 6.50, 70 percent becomes 7.00, 75 percent becomes 7.50.
  • Step 3: Compare with your notified figure, not with a rounded one. A value of 5.99 does not meet a 6.00 bar, however close it looks, unless the notification own rounding rule says otherwise.
Rounding rule to remember: never round across a cutoff. A converted figure of 59.96 percent stays below a 60 percent bar unless the form states a rounding rule that lifts it. Rounding up in your own favour is the fastest way to fail a verification check.

Worked Examples

Ten worked examples across the range students typically see, forward and reverse:

  • Example 1: 9.60 – 9.60 x 10 = 96.00 percent – exceptional, in the top band by a wide margin.
  • Example 2: 9.00 – 9.00 x 10 = 90.00 percent – outstanding, clears nearly every academic bar in India.
  • Example 3: 8.50 – 8.50 x 10 = 85.00 percent – exactly the common distinction threshold used in conventional banding.
  • Example 4: 8.40 – 8.40 x 10 = 84.00 percent – strong, in the First Division band, just below the distinction threshold.
  • Example 5: 8.00 – 8.00 x 10 = 80.00 percent – the headline example on this page, a round and easily checked figure.
  • Example 6: 7.50 – 7.50 x 10 = 75.00 percent – in the First Division band, a common postgraduate and recruitment reference point.
  • Example 7: 7.00 – 7.00 x 10 = 70.00 percent – solid, above the common 60 percent eligibility line by a full 10 points.
  • Example 8: 6.50 – 6.50 x 10 = 65.00 percent – in the First Division band, above the most common eligibility cutoff, with margin to spare.
  • Example 9: 6.00 – 6.00 x 10 = 60.00 percent – exactly the most common eligibility cutoff in Indian notifications.
  • Example 10: 5.50 – 5.50 x 10 = 55.00 percent – below the 60 percent line, so no First Division band label applies.

Reverse examples, for reading notifications:

  • 90 percent required – 90 / 10 = 9.00 needed.
  • 85 percent required – 85 / 10 = 8.50 needed, the conventional distinction threshold.
  • 75 percent required – 75 / 10 = 7.50 needed.
  • 65 percent required – 65 / 10 = 6.50 needed.
  • 60 percent required – 60 / 10 = 6.00 needed, the most common eligibility threshold.
  • 50 percent required – 50 / 10 = 5.00 needed.

Notice how the reverse examples expose a common misreading: a notification asking for 60 percent is asking for a value of 6.00 under this rule, not 6.32 as the CBSE 9.5 rule would give, and not 6.50 as an offset rule would give. Each university rule produces a different value for the same percentage, so always translate a cutoff with your own institute rule.

CGPA to Percentage Conversion Table

Quick reference using Percentage = CGPA x 10. Every 0.50 of the average is 5 percentage points, and every 0.10 is 1 percentage point, so any figure between rows can be read by moving the decimal point:

ValuePercentageConventional band
10.00100.00%Distinction band
9.5095.00%Distinction band
9.0090.00%Distinction band
8.5085.00%Distinction band
8.0080.00%First Division band
7.5075.00%First Division band
7.0070.00%First Division band
6.5065.00%First Division band
6.0060.00%First Division band
5.5055.00%Below 60 percent
5.0050.00%Below 60 percent
4.5045.00%Below 60 percent
4.0040.00%Below 60 percent

The band column follows the conventional Indian reading only: 85 percent and above as the distinction band, 60 percent to 84.99 percent as the First Division band, and below 60 percent as below that band. These bands are a conventional reading of the percentage, not a division printed on every transcript, so if a form asks for a division and your degree certificate or transcript already states one, quote the certificate wording, not a calculator band.

Division Bands: What the Percentage Means

Employers and application forms often ask for a division as well as a percentage, and the honest position for this institute is that the converted percentage is the primary evidence, while division wording should come from the certificate wherever one is printed. The calculator on this page uses the conventional bands below, and the table states plainly that they are conventional, so that no student mistakes a calculator label for an institute award.

Value rangePercentage rangeConventional bandHow to use it
8.50 to 10.0085.00% to 100.00%Distinction bandQuote the percentage; check the certificate for distinction wording
6.00 to 8.4960.00% to 84.99%First Division bandMeets the common 60 percent eligibility line
Below 6.00Below 60.00%Below the First Division bandCheck the specific notification, since some bars sit below 60 percent

The boundary cases deserve care. A value of 8.49 converts to 84.90 percent and stays in the First Division band, while 8.50 converts to 85.00 percent and reaches the distinction band: a gap of 0.01 decides the label, so the notified figure at full precision is what counts, never a rounded one. A value of 5.99 converts to 59.90 percent and does not meet a 60 percent bar, however close it looks. For context on what different levels open up in jobs and admissions across India, read What is a Good CGPA in India, and for the all-India conversion view, including universities whose rules differ sharply from this institute, read the guide on why the same CGPA gives different percentages.

IISc Compared With Other Universities

The same average number means a different percentage at different universities, because each university conversion rule differs, and some universities notify no formula at all. That is why a generic converter is dangerous: it applies one rule everywhere and is wrong almost everywhere. The comparison below sets this institute rule against the rules this site documents for other institutions, so that the difference is visible in one place:

University or boardConversion ruleStatus of the rule
IIScCGPA x 10Verified official
IIT DelhiCGPA x 10Official, see the IIT Delhi page on this site
CBSE school CGPACGPA x 9.5Board rule for school CGPA, not for universities
Offset-rule universities(CGPA – 0.5) x 10 or similarUsed by some universities, never here
Universities with no notified formulaNo single ruleCheck the institute, do not borrow a multiplier

Read the table as a warning, not a shortcut. A value of 8.00 is 80 percent here, but 76 percent under the CBSE school rule, and 75 percent under a minus-0.5 offset rule. A student who borrows the CBSE rule understates the result by 4 points and may miss a cutoff that was actually met. Always convert with your own institute rule, and never quote a percentage converted with another university formula: a verification against your own institute rule will expose the mismatch. The CGPA to GPA page covers conversion to the 4-point GPA scale used by many foreign universities, which is a separate conversion from the percentage conversion on this page. The IIT Delhi CGPA to Percentage page covers the nearest IIT comparison in full.

Common Mistakes Students Make

  • Using x 9.5. That is the CBSE school rule. It understates every result here by 0.5 of a percentage point per 0.1 of the average, so an 8.00 becomes 76.00 percent instead of 80.00 percent.
  • Using an offset rule. Formulas such as (value – 0.75) x 10 or (value – 0.5) x 10 belong to other universities. This rule has no offset, so every offset understates the result.
  • Averaging semester figures without credits. A cumulative average is credit-weighted across all courses, not a plain average of semester figures. A strong semester with few credits cannot cancel a weak semester with many credits on a simple average.
  • Converting a semester figure and quoting it as the degree percentage. A single semester figure describes one semester. The degree percentage comes from the cumulative figure.
  • Rounding the average before converting. Converting 8.47 as 8.5 adds 0.30 of a percentage point. Convert at full precision and round only the final percentage.
  • Rounding across a cutoff. A converted 59.96 percent is below a 60 percent bar unless the notification rounding rule says otherwise. Never round up in your own favour, and never round 8.49 up to the 8.50 distinction threshold.
  • Trusting a generic converter that defaults to 9.5. Most generic calculators default to the CBSE multiplier because it is the most searched rule. Cross-check the multiplier against the institute source before trusting any tool, including this one.
  • Quoting a division label from a converter. The bands on this page are a conventional reading of the percentage. Quote only the division on your certificate or transcript where one is printed.
  • Mixing scales. A 10-point average and a 4-point GPA are different scales, and an 8-point scale value must never be entered into a 10-point calculator. Confirm the scale before converting.
  • Using another school rating formula. Selection rating formulas used by one school or programme for ranking applicants are not general conversion rules, and they must never replace the institute rule on a general form.

Using Your Percentage on Forms

Placement portals, postgraduate applications, scholarship forms and government notifications all ask for percentage in slightly different ways, and the same converted figure has to be entered correctly in each of them. Follow this routine:

  • Step 1: Read the field label, not just the heading. A field labelled percentage wants the converted figure. A field labelled average wants the notified average. A field labelled marks obtained out of total marks wants marks, not a converted percentage, and filling it with a converted figure is a misstatement.
  • Step 2: Convert with the institute rule and keep the working. Write down the average, the multiplication and the result, so that you can reproduce it if a verifier asks. For example: 8.00, 8.00 x 10 = 80.00 percent.
  • Step 3: Match the decimal places the form expects. If the form accepts two decimals, enter 80.00. If it accepts one decimal, enter 80.0. If it accepts only whole numbers, check whether the form rounds or truncates, and follow its instruction rather than your own habit.
  • Step 4: Translate cutoffs with the same rule. Before applying, convert every cutoff in the notification with divide by 10 and check your average against it directly. A notification asking for 65 percent is asking for 6.50 under this rule, and a notification asking for First Division is asking for 60 percent or 6.00.
  • Step 5: Keep the grade card ready. Recruiters and admission offices that question a converted figure will ask for the source document. The grade card showing the average, together with the institute source wording, ends the discussion faster than any explanation.
  • Step 6: For foreign applications, check what the institution wants. Some foreign universities ask for the average itself and convert it on their own scale, some ask for a percentage, and some ask for a credential evaluation. Do not convert to a 4-point GPA with the percentage rule, and do not present a percentage as a GPA. The CGPA to GPA page covers the 4-point conversion separately.

Government and public sector notifications deserve special care, because many of them state a percentage bar without stating a conversion rule. Where a notification states a percentage and a graduate of this institute must prove eligibility, the converted figure plus the institute source wording is the standard evidence. Where a notification is silent about conversion, do not assume the recruiting authority will apply the institute rule on your behalf: write to the authority or the academic office and get the position confirmed before the closing date, not after shortlisting. Quote the source, with its number and date where one exists, rather than paraphrasing it from memory.

How to Raise Your CGPA

Because the average is credit-weighted, raising it is a matter of arithmetic as much as effort: the remaining credits, their weights, and the grades you can realistically earn in them decide how far the average can move. A student with many credits still to earn can move the average substantially, while a final-year student with few credits left can move it only a little, however strong the final semester. Planning from the target backwards is therefore the honest way to set expectations, and the calculator reverse mode on this page is the starting point: decide the percentage you need, divide by 10, and you have the target average.

Worked planning examples show the scale of the task. A student with an average of 7.00 after 100 credits who wants 7.50 after 140 credits needs the remaining 40 credits to average 8.75, because the total credit points must rise from 700 to 1,050, leaving 350 points to earn in 40 credits. A student with an average of 6.00 after 60 credits who wants 7.00 after 120 credits needs the remaining 60 credits to average 8.00. A student with an average of 8.00 after 140 credits who wants 8.50 after 160 credits needs the remaining 20 credits to average 12.00, which is impossible on a 10-point scale, so that target cannot be met in the time left and a realistic target must be set instead. Doing this arithmetic before the semester starts prevents a plan built on an impossible average, including a distinction target that is already out of reach.

  • Prioritise high-credit courses. A 4-credit course at the top grade earns 40 credit points, while a 2-credit course at the same grade earns 20. Effort follows credits: the heavy course deserves the heavier preparation.
  • Protect the courses where you are close to a grade boundary. Moving up one grade step in a 4-credit course adds several credit points, which is worth more than a small gain in a light course.
  • Clear failed courses through the routes the regulations provide. A failed course contributes no passing grade points, and most regulations provide for repeat courses within stated limits, so use the defined route rather than assuming a failed course simply disappears.
  • Do not neglect laboratories and projects. Heavy-credit practical and project courses move the average as much as theory courses, and they are often graded on continuous work that rewards steady effort more than a single examination.
  • Track the running average every semester, not only at graduation. A semester that slips unnoticed becomes a permanent part of the cumulative average, and the cost of recovering it grows with every semester that passes.

For a full plan, including study routines, grade targeting by course weight, and backlog recovery, read How to Improve CGPA and How to Raise Your GPA Without Guesswork. Both guides work from the same principle used here: start from the target, work backwards through the credits, and spend effort where the credit points are.

Getting a Conversion Certificate

When a form demands an official figure rather than your own arithmetic, the institute source document is the evidence to attach, and a conversion certificate or transcript note is the document to request where one is available. IISc states in its 2021 notification that no individual certificate or letter on conversion would be issued after that notification. In practice, that means the notification itself is the evidence: quote reference IISc/Acad/CGPA-Conversion/2021, dated 14 October 2021, together with your value and the multiplication, and attach a copy of the notification where a form allows an upload. Do not pay any third party for an IISc conversion certificate, because the institute has said it will not issue one.

The history of the rule matters here, because an older document can contradict a current one and both can look official. IISc changed scales in August 2016, from an 8-point scale to a 10-point scale, and the conversion multiplier changed with it, from 12.5 to 10. Both multipliers give 100 percent at the top of their scale, 8 times 12.5 and 10 times 10, which is a useful check that the two rules are consistent rather than contradictory. The confusion arises only when a scale and a multiplier are mixed: an 8-point value of 7.0 is 87.50 percent under the old rule, but only 70.00 percent if wrongly multiplied by 10, so the joining year must be checked before any IISc conversion.

Keep three items together for any verification: the grade card showing the notified average, the institute source wording for the rule, and the working that shows the multiplication. A verifier who can see all three has nothing left to question, and a student who can produce all three never has to argue about a converter website. If a recruiter still disputes the figure after seeing the source, ask which rule they are applying and request the dispute in writing, because a written dispute can be answered with the source document, while a verbal one cannot.

Frequently asked

Common questions

What is the formula for IISc CGPA to percentage?

Percentage = CGPA x 10. Multiply your IISc CGPA by 10. For example, CGPA 8.0 gives 80.00 percent.

Is the IISc CGPA x10 formula official?

Yes. The signed IISc notification IISc/Acad/CGPA-Conversion/2021, dated 14 October 2021, records Senate approval on 11 November 2019 and states: on the 10-point scale, multiply CGPA by 10 to get percentage, as a notional conversion.

What is 8.0 CGPA in percentage at IISc?

8.0 CGPA x 10 = 80.00 percent, which sits in the First Division band under the conventional banding used on this page.

What CGPA is 75 percent at IISc?

Divide the percentage by 10. 75 percent / 10 = 7.50 CGPA.

What is the difference between CGPA and SGPA?

CGPA is the cumulative average across all semesters completed so far, while SGPA is the average of one semester only. Convert a CGPA for a degree percentage and an SGPA for a single semester percentage, and never quote a semester figure as the degree percentage.

What conversion mistakes should IISc students avoid?

Do not use 9.5, which is the CBSE school rule, do not use an offset rule from another university, and do not enter an 8-point scale value into a 10-point calculator. Pre-August 2016 IISc students use value x 12.5, not value x 10.

Conclusion

The iisc cgpa to percentage conversion rests on a signed notification, not on a converter convention: multiply the 10-point CGPA by 10, call the result notional, and quote the notification reference where a verifier asks for proof. Students who joined before August 2016 must use the 8-point rule instead, and every student should keep the notified CGPA beside the converted percentage on any form that allows both.

Need the all-India conversion?
Convert any CGPA to percentage

Use the main CGPA to Percentage guide for the combined tool and the rules for other universities.

Convert CGPA to Percentage