HPU SGPA to Percentage Calculator 2026: 2025 x10 Rule, Older x9.5 Check, Tables and Examples
Use the hpu sgpa to percentage below to convert your Himachal Pradesh University SGPA with the rules stated on this page, including every disputed or batch-dependent figure shown beside the main result. Enter your sgpa for your percentage and division band, or enter a percentage to work backwards to the SGPA you need. The grading scale, worked examples and conversion table are all on this page.
Two rules, check your batch: the 2025 HPU Curriculum and Credit Framework for undergraduate programmes states Percentage = CGPA x 10, while many older secondary guides cite CGPA x 9.5. The calculator shows the x10 figure first and the x9.5 figure beside it.
Himachal Pradesh University, Shimla, awards its results on a 10-point scale, and this page is the honest conversion guide for it: the calculator above, the source position with its status label, the grading scale, and the worked examples below all use the same rules, with nothing presented as settled that the sources do not settle. For the all-India overview, read the main CGPA to Percentage guide first if you are comparing universities, then use this page for the SGPA figure itself.
How SGPA to Percentage Conversion Works at HPU
Himachal Pradesh University, Shimla, awards its results on a 10-point scale, yet recruiters, postgraduate admission portals, scholarship forms and government notifications almost always ask for a percentage. That mismatch is the whole reason this page exists: one average, one multiplier question, and a wrong multiplier that still produces a plausible-looking percentage. This page gives you the calculator, the exact source position, the grading scale behind the average, worked examples across the range, and an honest account of where the rule is disputed, conflicted or settled, so that you never have to guess which multiplier a verifier will apply.
SGPA is a semester average: it pools only the courses of one semester, weighted by their credits. The same university conversion rule is applied to an SGPA figure on this page, because the rule converts a 10-point average to a percentage whatever its scope. The result is therefore the percentage equivalent of that one semester, not of the degree. The degree percentage comes from the CGPA, which pools every semester SGPA with its credits, and quoting a semester percentage as a degree percentage misstates the result.
Three distinctions keep every conversion on this page clean. First, use the figure printed on the mark sheet, not a figure recomputed from memory or from rounded semester averages. Second, percentage and marks are not the same thing in every context: a percentage converted from an average is an equivalent percentage for eligibility and comparison, while a form that asks for marks obtained out of total marks wants a different calculation, covered on the Marks to Percentage page. Third, the all-India overview, with one combined tool, is on the main CGPA to Percentage guide, and the difference between a semester figure and a cumulative figure is on the SGPA Vs CGPA guide.
HPU SGPA to Percentage Formula
The HPU SGPA to percentage position is stated in the formula blocks below. Read the official-basis section next to it before quoting any one of them, because the status of each formula differs by university, and the status is what decides whether a figure survives verification.
Two formulas, two answers, and a batch question between them. The 2025 framework rule moves the decimal point one place: 8.0 becomes 80.00 percent. The older cited rule multiplies by 9.5: 8.0 becomes 76.00 percent. The gap is 4 percentage points at 8.0 and 5 points at 10.0, which is more than enough to decide a cutoff, a division and a shortlist. That is why this page never hides the second figure: the calculator shows both, and the department answer for your batch decides which one you quote.
The reverse formula translates a stated percentage cutoff back into the average you need, and it is the formula to use before applying anywhere: divide the cutoff by the same multiplier. A 75 percent cutoff, a 60 percent cutoff and a 50 percent cutoff each mean a different average under each rule on this page, so always translate cutoffs with the same rule you used for the forward conversion, never with a different one.
- Forward conversion: multiply the notified average by the multiplier for your rule.
- Reverse conversion: divide the percentage cutoff by the same multiplier.
- Rounding: convert at full precision and round only the final percentage.
- Ceiling: the maximum average of 10.00 converts to 100.00 percent under a plain x10 rule.
The Official Basis and the Disputed Claims
Himachal Pradesh University, Shimla, runs its undergraduate programmes under the Choice Based Credit System and, for newer batches, the Curriculum and Credit Framework under NEP 2020. The strongest HPU conversion source found for this page is an HPU Academic Branch letter, No. 7-1/2024-HPU(Acad) dated 05 February 2025, reproduced in an affiliated college Curriculum and Credit Framework prospectus for undergraduate programmes. That document states the conversion formula directly: Percentage = CGPA X 10. It is a clear statement, and it is the primary rule on this page.
The same framework document carries a reservation that matters for a large group of students. It notes that the conversion formula for UG professional courses, naming BBA, BCA, B.Tech, BFA and BA-LLB among them, will be as per notification if notified separately. A professional-course student who applies the general x10 rule without checking the department notice may therefore use the wrong rule for that course, and this page flags that reservation wherever the x10 figure appears.
The conflict is with the older figure. Many secondary guides describe CGPA x 9.5 as the HPU official formula, usually without citing a notification, a letter number or a date. The x9.5 multiplier is the UGC and CBSE general recommendation, and it is plausible that older HPU practice followed it, or that guides copied it from the general recommendation. No HPU notification stating x9.5 was found for this page, and no document was found that settles which rule governs pre-2025 batches. This page therefore treats HPU as conflicted: x10 is the 2025 framework rule, x9.5 is the older cited rule, and both are shown until a department confirms the rule for your batch.
Verify the position through the Himachal Pradesh University official website and the affiliated college prospectus reproducing the 2025 framework, and through the University Grants Commission framework. If your department notice states a different multiplier for your course or batch, that notice governs your conversion, not this page.
| Rule | Formula | What it means for 8.0 | Status |
|---|---|---|---|
| 2025 CCF framework | Percentage = CGPA x 10 | 80.00 percent | HPU Academic Branch letter, 05 Feb 2025, for UG programmes |
| Older cited rule | Percentage = CGPA x 9.5 | 76.00 percent | Widely cited in secondary guides, no notification found |
| Professional courses | As per separate notification, if any | Check department notice | 2025 framework note reserves this for BBA, BCA, B.Tech and similar courses |
HPU Grading System
HPU grading is more detailed than a simple 10-point table, because the university uses two grading modes. Absolute grading applies where the total number of students in a course across HPU and its affiliated colleges is 50 or fewer, and relative grading applies where the number is more than 50, with the Controller of Examinations grading each class against its own distribution. The absolute table below uses half-point steps, from S+ at 10.0 down through S, O++, O+, O, A++, A+, A, B+, B and C, which is why an HPU average can carry values such as 7.32 or 8.5 that a whole-point scale would never produce. Relative grading means the same marks can earn a different grade in a different class, so the table is a guide to the absolute mode, not a promise for every course.
| Letter Grade | Marks band | Grade Point | Description |
|---|---|---|---|
| S+ | 95 and above | 10.0 | Outstanding |
| S | 90 to below 95 | 9.5 | Excellent |
| O++ | 85 to below 90 | 9.0 | Outstanding |
| O+ | 80 to below 85 | 8.5 | Very Good |
| O | 75 to below 80 | 8.0 | Very Good |
| A++ | 70 to below 75 | 7.5 | Good |
| A+ | 65 to below 70 | 7.0 | Good |
| A | 60 to below 65 | 6.5 | Above Average |
| B+ | 55 to below 60 | 6.0 | Average |
| B | 50 to below 55 | 5.5 | Average |
| C | 45 to below 50 | 5.0 | Pass |
| F | Below 40 | 0.0 | Fail |
The table above is the absolute-grading mode. Under relative grading, the Controller of Examinations grades each class against its own distribution, so the same marks can earn a different grade in a different class. Read the grade legend on your own mark sheet for the grade actually awarded.
Several features of a 10-point letter-grade system deserve attention because they change how a semester plays out. First, the scale steps in whole or half points, so one grade step in one course is worth exactly that many grade points, and the credit weight of the course decides how much that step moves the average. Second, failed, absent and audit grades do not contribute passing grade points, so a failed course neither helps the average nor disappears from the record. Third, grade letters look alike across universities while their points and marks ranges differ, so only the HPU table governs an HPU mark sheet. Do not borrow a grade point from another university scale.
How SGPA Is Calculated at HPU
SGPA is formed exactly like CGPA, but over one semester only: sum of (credits x grade point) for the semester, divided by total semester credits. The worked semester below is a complete SGPA calculation, and the same pooling repeated across semesters, with each semester credits as weights, gives the CGPA. Averaging semester SGPAs without their credits is the most common recomputation error, and it gives a different number from the notified CGPA whenever semesters carry different credit totals.
| Course | Credits | Grade | Grade Point | Credits x Grade Point |
|---|---|---|---|---|
| Core course 1 | 6 | O | 8.0 | 48.0 |
| Core course 2 | 6 | A++ | 7.5 | 45.0 |
| Elective course | 4 | A+ | 7.0 | 28.0 |
| Skill course | 4 | B+ | 6.0 | 24.0 |
| Practical | 2 | O+ | 8.5 | 17.0 |
| Total | 22 | 162.0 |
Semester average = 162.0 / 22 = 7.36. Converted two ways: 7.36 x 10 = 73.60 percent under the 2025 framework, and 7.36 x 9.5 = 69.92 percent under the older cited rule. The half-point grades in this example, 8.5 and 7.5, are normal at HPU because the absolute scale steps in halves, and they must be carried at full precision into the average, never rounded to whole points first.
A student who recomputes an average from a mark sheet and finds a small mismatch should check the credits column first, then check whether a repeated course, an audit course or an excluded grade is in the list, and only then query the department. Small mismatches are almost always a weighting or exclusion error in the recomputation, not an error in the notified figure. The guide on CGPA Calculation Mistakes walks through the usual recomputation errors, and the most common one is exactly this: treating every course, or every semester, as equal weight.
Step-by-Step: Converting Your SGPA
From mark sheet to a finished percentage in four steps:
- Step 1: Take the exact SGPA from your official mark sheet. Use the notified figure, for the correct semester or cumulative period. Do not use a semester SGPA in place of the CGPA, and do not use a figure you calculated yourself from rounded semester figures when the mark sheet figure is available.
- Step 2: Apply the multiplier for your rule. Use the calculator on this page, and note which rule you applied, because the rule name is part of the answer wherever the rule is disputed or batch-dependent.
- Step 3: Keep two decimals. Write 80.00 percent, not 80 percent, where the form expects a precise figure, and match the receiving form decimal places. Round only the final percentage, never the average before converting.
- Step 4: Quote both figures where the form allows it. Many portals have separate average and percentage fields. Filling both lets a verifier check the conversion at a glance and removes doubt about which multiplier was used.
Reverse conversion runs the same steps backwards: take the cutoff percentage exactly as notified, divide by the same multiplier, and compare with your notified average, not a rounded one. A figure of 5.99 does not meet a 6.00 bar, however close it looks, unless the notification own rounding rule says otherwise.
Worked Examples
Ten worked examples across the range students typically see, forward first:
- SGPA 9.60 – 96.00 percent under the 2025 x10 framework, 91.20 percent under the older x9.5 rule.
- SGPA 9.00 – 90.00 percent under the 2025 x10 framework, 85.50 percent under the older x9.5 rule.
- SGPA 8.50 – 85.00 percent under the 2025 x10 framework, 80.75 percent under the older x9.5 rule.
- SGPA 8.00 – 80.00 percent under the 2025 x10 framework, 76.00 percent under the older x9.5 rule.
- SGPA 7.50 – 75.00 percent under the 2025 x10 framework, 71.25 percent under the older x9.5 rule.
- SGPA 7.00 – 70.00 percent under the 2025 x10 framework, 66.50 percent under the older x9.5 rule.
- SGPA 6.50 – 65.00 percent under the 2025 x10 framework, 61.75 percent under the older x9.5 rule.
- SGPA 6.00 – 60.00 percent under the 2025 x10 framework, 57.00 percent under the older x9.5 rule.
- SGPA 5.50 – 55.00 percent under the 2025 x10 framework, 52.25 percent under the older x9.5 rule.
- SGPA 5.00 – 50.00 percent under the 2025 x10 framework, 47.50 percent under the older x9.5 rule.
Reverse examples, for reading notifications:
- 95.00 percent required – 9.50 SGPA under the 2025 x10 framework, 10.00 under the older x9.5 rule.
- 90.00 percent required – 9.00 SGPA under the 2025 x10 framework, 9.47 under the older x9.5 rule.
- 85.00 percent required – 8.50 SGPA under the 2025 x10 framework, 8.95 under the older x9.5 rule.
- 80.00 percent required – 8.00 SGPA under the 2025 x10 framework, 8.42 under the older x9.5 rule.
- 75.00 percent required – 7.50 SGPA under the 2025 x10 framework, 7.89 under the older x9.5 rule.
- 70.00 percent required – 7.00 SGPA under the 2025 x10 framework, 7.37 under the older x9.5 rule.
- 65.00 percent required – 6.50 SGPA under the 2025 x10 framework, 6.84 under the older x9.5 rule.
- 60.00 percent required – 6.00 SGPA under the 2025 x10 framework, 6.32 under the older x9.5 rule.
- 55.00 percent required – 5.50 SGPA under the 2025 x10 framework, 5.79 under the older x9.5 rule.
- 50.00 percent required – 5.00 SGPA under the 2025 x10 framework, 5.26 under the older x9.5 rule.
Notice how the reverse examples expose a common misreading: a notification asking for 60 percent is asking for a different average under each rule on this page. Each university rule produces a different average for the same percentage, so always translate a cutoff with your own rule, and never quote a percentage converted with another university formula.
HPU SGPA to Percentage Conversion Table
Quick reference using the rules on this page. Every 0.50 of SGPA is 5 percentage points under a plain x10 rule, and every 0.10 is 1 percentage point, so any figure between rows can be read by moving the decimal point under that rule. Under x9.5, every 0.10 is 0.95 points, and under the band-midpoint rule the table column already carries the half-point subtraction.
| SGPA | 2025 framework x10 | Older cited rule x9.5 |
|---|---|---|
| 10.00 | 100.00% | 95.00% |
| 9.50 | 95.00% | 90.25% |
| 9.00 | 90.00% | 85.50% |
| 8.50 | 85.00% | 80.75% |
| 8.00 | 80.00% | 76.00% |
| 7.50 | 75.00% | 71.25% |
| 7.00 | 70.00% | 66.50% |
| 6.50 | 65.00% | 61.75% |
| 6.00 | 60.00% | 57.00% |
| 5.50 | 55.00% | 52.25% |
| 5.00 | 50.00% | 47.50% |
| 4.50 | 45.00% | 42.75% |
| 4.00 | 40.00% | 38.00% |
Read the table by rule, not by row alone. A row gives one average and several percentages, one per rule, and the rule column you read must match the rule your department applies. A table read without its rule column is how a correct average becomes a wrong percentage on a form.
Division Bands
Employers and application forms often ask for a division as well as a percentage, and the bands below are the bands the calculator on this page uses. They are labelled honestly: where a university division regulation was not verified for this page, the bands are the commonly used eligibility reading, not a division award quoted from a university document. Where your degree certificate or transcript already states a division, quote the certificate wording, not a calculator band.
| Percentage range | Division | Note |
|---|---|---|
| 60.00 percent and above | First Division | Common eligibility reading, first class starts at 60 percent in secondary guides |
| 50.00 to 59.99 percent | Second Division | Common eligibility reading |
| 40.00 to 49.99 percent | Pass Division | Minimum pass is 40 percent in most HPU subjects |
| Below 40.00 percent | Below pass | Fail on the HPU scale |
Boundary cases deserve care. A figure just below a threshold stays below it: a small gap in the average decides the label, so the notified average at full precision is what counts, never a rounded one. If a form asks for a division and your certificate states one, the certificate is the document a verifier will check, and the calculator band is only a guide to reading it.
For context on what different levels open up in jobs and admissions across India, read What is a Good CGPA in India, and for the all-India conversion view, including universities whose rules differ sharply from HPU, read the guide on why the same CGPA gives different percentages.
HPU Compared With Other Universities
The same average number means a different percentage at different universities, because each university conversion rule differs, and some universities notify no formula at all. That is why a generic converter is dangerous: it applies one rule everywhere and is wrong almost everywhere. The comparison below sets the HPU position against the rules this site documents for other institutions, so that the difference is visible in one place.
| University or Board | Conversion rule | Status of the rule |
|---|---|---|
| Himachal Pradesh University, 2025 UG framework | CGPA x 10 | HPU Academic Branch letter, 05 Feb 2025 |
| Himachal Pradesh University, older cited rule | CGPA x 9.5 | Secondary guides, no notification found |
| CBSE school CGPA | CGPA x 9.5 | Board rule, the likely source of the older HPU figure |
| Offset-rule universities | (CGPA – 0.75) x 10 or (CGPA – 0.5) x 10 | Used by some universities, not cited for HPU |
Read the table as a warning, not a shortcut. An average of 8.00 is 80 percent under x10, 76 percent under x9.5, and 75 percent under a minus-0.5 offset rule. A student who borrows the wrong rule understates or overstates the result by several points and may miss a cutoff that was actually met, or claim one that was not. Always convert with your own rule. The CGPA to GPA page covers conversion to the 4-point GPA scale used by many foreign universities, which is a separate conversion from the percentage conversion on this page and must not be confused with it.
Common Mistakes HPU Students Make
- Using x9.5 for a 2025-framework batch without checking. The 2025 framework states x10 for undergraduate programmes. An older guide that says x9.5 may describe an older batch, not yours.
- Assuming the general rule covers a professional course. The 2025 framework reserves UG professional courses for a separate notification. BBA, BCA, B.Tech, BFA and BA-LLB students must check their department notice.
- Using a generic converter that defaults to x9.5. Most generic calculators default to the CBSE and UGC multiplier because it is the most searched rule. Cross-check the multiplier against your own university rule before trusting any tool, including this one.
- Rounding the average before converting. Converting 8.47 as 8.5 adds a real error to the percentage. Convert at full precision and round only the final percentage.
- Averaging semester figures without credits. SGPA is credit-weighted. A plain average of semester figures gives the wrong cumulative figure whenever semesters carry different credit totals.
- Rounding across a cutoff. A converted 59.96 percent stays below a 60 percent bar unless the form states a rounding rule that lifts it. Never round up in your own favour.
- Quoting a semester figure as a degree figure. A single semester average describes one semester. The degree percentage comes from the cumulative CGPA.
The pattern behind every mistake above is the same: a plausible number from the wrong rule, the wrong scope or the wrong rounding. The defence is also the same every time: the notified average from the mark sheet, the named rule for your batch and programme, conversion at full precision, and both figures quoted where the form allows it. A conversion done that way survives verification, and a conversion done any other way is a gamble.
Using Your Percentage on Forms
Placement portals, postgraduate applications, scholarship forms and government notifications all ask for percentage in slightly different ways, and the same converted figure has to be entered correctly in each of them. Follow this routine:
- Step 1: Read the field label, not just the heading. A field labelled percentage wants the converted figure. A field labelled average wants the notified average. A field labelled marks obtained out of total marks wants marks, not a converted percentage, and filling it with a converted figure is a misstatement.
- Step 2: Convert with the HPU rule and keep the working. Write down the average, the multiplier and the result, so that you can reproduce it if a verifier asks.
- Step 3: Match the decimal places the form expects. If the form accepts two decimals, enter 80.00. If it accepts one decimal, enter 80.0. If it accepts only whole numbers, check whether the form rounds or truncates, and follow its instruction rather than your own habit.
- Step 4: Translate cutoffs with the same rule. Before applying, convert every cutoff in the notification with the reverse mode and check your average against it directly.
- Step 5: Keep the mark sheet ready. Recruiters and admission offices that question a converted figure will ask for the source document. The mark sheet showing the average, together with the rule wording, ends the discussion faster than any explanation.
- Step 6: For foreign applications, check what the institution wants. Some foreign universities ask for the average itself and convert it on their own scale, some ask for a percentage, and some ask for a credential evaluation. Do not convert to a 4-point GPA with the percentage rule, and do not present a percentage as a GPA.
Government and public sector notifications deserve special care, because a verification failure there costs an application, not just a correction. Where a notification is silent about conversion, do not assume the recruiting authority will apply the institute rule on your behalf: write to the authority or the university and get the position confirmed before the closing date, not after shortlisting.
How to Raise Your HPU SGPA
Because the average is credit-weighted, raising it is a matter of arithmetic as much as effort: the remaining credits, their weights, and the grades you can realistically earn in them decide how far the average can move. A student with many credits still to earn can move the average substantially, while a final-year student with few credits left can move it only a little, however strong the final semester. Planning from the target backwards is therefore the honest way to set expectations, and the calculator reverse mode on this page is the starting point: decide the percentage you need, divide by the multiplier for your rule, and you have the average target.
Worked planning examples show the scale of the task. A student with an average of 7.00 after 100 credits who wants 7.50 after 140 credits needs the remaining 40 credits to average 8.75, because the total credit points must rise from 700 to 1,050, leaving 350 points to earn in 40 credits. A student with an average of 6.00 after 60 credits who wants 7.00 after 120 credits needs the remaining 60 credits to average 8.00. A student with an average of 8.00 after 140 credits who wants 8.50 after 160 credits needs the remaining 20 credits to average 12.00, which is impossible on a 10-point scale, so that target cannot be met in the time left and a realistic target must be set instead. Doing this arithmetic before the semester starts prevents a plan built on an impossible average.
- Prioritise high-credit courses. A 4-credit course at grade point 10 earns 40 credit points, while a 2-credit course at the same grade earns 20. Effort follows credits.
- Protect the courses where you are close to a grade boundary. Moving one grade step in a 4-credit course adds 4 credit points, which is worth more than a small gain in a light course.
- Clear failed courses through the defined routes. A failed course contributes no passing grade points, so use the university repeat and re-examination routes rather than assuming a failed course simply disappears.
- Do not neglect laboratories and projects. Heavy-credit practical and project courses move the average as much as theory courses, and they are often graded on continuous work that rewards steady effort.
- Track the running average every semester, not only at graduation. A semester that slips unnoticed becomes a permanent part of the cumulative average, and the cost of recovering it grows with every semester.
For a full plan, including study routines, grade targeting by course weight, and backlog recovery, read How to Improve CGPA and How to Raise Your GPA Without Guesswork. Both guides work from the same principle used here: start from the target, work backwards through the credits, and spend effort where the credit points are.
Getting a Conversion Certificate
When a form demands an official figure, apply to your college or to the HPU Controller of Examinations with a copy of the mark sheet, and ask which rule governs your batch and course: the 2025 x10 framework, or a separate professional-course notification. Get that answer in writing before a deadline, not after a verifier queries the figure, because the HPU conflict on this page is exactly the kind of dispute a written department answer settles. Keep the written answer beside the mark sheet for every later verification.
A conversion document matters most in three situations. First, government and public sector verification, where an authority may not accept a self-converted figure without university backing. Second, foreign credential evaluation, where an evaluator wants the university own statement of its grading and conversion system rather than a third-party converter printout. Third, any case where a verifier quotes a different multiplier: the university wording, with its number and date where one exists, together with the transcript, settles the point. For routine placements and internships, the rule wording and the mark sheet are normally enough. For anything high-stakes, get the position in writing before the deadline, not after a verifier queries the figure.
Mark sheet discrepancies have a defined route at every university: check every mark sheet the day it arrives, compare the credits, grades and average against your own record, and raise any error within the specified window. A discrepancy discovered at verification stage, months later, is far harder to correct than one raised on time.
Frequently asked
Common questions
What is SGPA at HPU?
SGPA is the Semester Grade Point Average: the credit-weighted average of grade points for one semester only. CGPA pools every semester completed so far.
Does the same conversion rule apply to SGPA at HPU?
Yes. The 2025 framework x10 rule and the older x9.5 rule are both applied to an SGPA figure on this page. The result is the percentage equivalent of that one semester, not of the degree.
What is 7.4 SGPA in percentage at HPU?
Under the 2025 framework, 7.4 x 10 = 74.00 percent. Under the older cited rule, 7.4 x 9.5 = 70.30 percent.
What SGPA is 74 percent at HPU?
Under the 2025 framework, 74 / 10 = 7.40 SGPA. Under the older cited rule, 74 / 9.5 = 7.79 SGPA.
Why does HPU grading look different from other universities?
HPU uses absolute grading for small classes and relative grading for larger classes, with half-point grade steps such as 9.5, 8.5 and 7.5. The exact grade band for a course therefore depends on the class size and the Controller of Examinations grading for that course.
Where do I get an official SGPA conversion for HPU?
From your college or the HPU Controller of Examinations, with your mark sheet. For professional courses, check the department notice first, because the 2025 framework reserves those courses for a separate notification.
Conclusion
Converting a HPU SGPA to a percentage takes one multiplication once the rule is known, and this hpu sgpa to percentage has shown you why that rule is the 2025 x10 framework rule first and the older x9.5 figure beside it, because the two sources conflict and your batch decides which one governs, how the grading scale and credit weighting build the average it converts, and where the honest limits lie: never quote a disputed figure as settled, never borrow another university multiplier, and never round across a cutoff. Use the notified average at full precision, convert with the rule for your programme and batch, keep your mark sheet beside the converted figure, and get the position in writing for anything high-stakes. For the all-India view, see the main CGPA to Percentage guide, and for the difference between a semester figure and the cumulative figure, see the SGPA Vs CGPA guide.
Need the all-India conversion?
Convert any CGPA to percentage
Use the main CGPA to Percentage guide for the combined tool and the rules for other universities.
Convert CGPA to Percentage